How can we help you today?

Iron-on Designs: Application instructions

Cricut Iron-on Designs are cut and ready to be applied to your projects. 

 

Recommended for

100% cotton, 100% polyester, poly/cotton blends

 

For Cricut EasyPress

  1. Set EasyPress to 340°F (171°C).
  2. Preheat material for 10-15 seconds. 
  3. Place the design onto the preheated material.
  4. Heat each part of the design for 50 seconds with medium pressure. 
  5. Flip base material over and heat back side of the design for 15 seconds.
  6. Let cool completely and remove lining. 

 

For household irons

  1. Set your iron to the Cotton/Linen setting. Make sure steam setting is OFF for steam irons.
  2. Preheat material for 10 to 15 seconds. 
  3. Place the design onto the preheated material. 
  4. Heat each part of the design for 50 seconds with medium pressure. 
  5. Flip base material over and heat back side of the design for 15 seconds. 
  6. Let cool completely and remove lining.

 

Care instructions

  • Wait 24 hours after iron-on application before washing.
  • Turn garment inside out.
  • Wash and tumble dry on low or medium heat.
  • Do not bleach or dry clean.
  • If you need to iron, turn garment inside out and iron the back side.