Edited: November 4, 2026
Overview
Print Then Cut lets you create a design in Design Space, print it on your home printer, then load the print into your compatible Cricut smart cutting machine for cutting. The machine scans the printed cut sensor marks, then cuts your design with precision. Use it to make stickers, toppers, cut photos, and more, without scissors.
Words to know
- Flatten: Converts a multi-layer design into a single printable layer. The machine cuts just the outer shape of a flattened object.
- Operation: Tells Design Space how your machine will interact with the material. When you flatten a design, the Operation changes to Print Then Cut automatically.
- Upload: Imports images into Design Space from a variety of sources and file types, so you can make Print Then Cut designs.
- Sensor: A built-in feature of Print Then Cut-capable machines that scans for the printed sensor marks so the design is cut precisely.
- Sensor marks: Printed markings on the page that tell the machine where to cut.
- Bleed: A small border of color added around each image for more precise cutting. The border is trimmed off during cutting.
- Offset: Creates a proportionally larger or smaller layer of your design. Useful for custom stickers, cake toppers, and t-shirt designs.
- System print dialog: Your computer’s own print window (from Windows or macOS). Design Space opens it when you select Print, and it is where you choose your printer and confirm paper size.
What you need
- Design Space software on Windows/Mac computer, iOS mobile device, or Android mobile device
- Compatible Cricut smart cutting machine, cutting mat, and blade
- Compatible home printer
- Compatible printable materials
Compatible Cricut smart cutting machines
Cricut smart cutting machines capable of Print Then Cut include:
- Cricut Joy 2
- Cricut Joy Xtra
- Cricut Explore machines
- Cricut Maker machines
- Cricut Venture machines
Note: Cricut Joy can Cut and Draw but is not capable of Print Then Cut.
Compatible printers
Inkjet (Recommended)
- Uses ink cartridges and small nozzles to spray fine ink droplets onto the material
- Best printer type for a wide variety of printable materials including printable vinyl, printable iron-on, sticker paper, etc.
Laser
- Uses high heat to fuse toner to the material
- Not for use with heat-sensitive materials such as printable vinyl or printable iron-on
- Works very well for regular printer paper, some weights of card stock, and specialty materials specifically manufactured for use with laser printers to withstand the high heat
Note: For Design Space on iOS, choose a printer that supports AirPrint.
Compatible printable materials
- Cricut Explore Air 2 and older machines: Print on non-reflective matte white or transparent materials only. Reflective materials, glossy materials, or darker colors will interfere with the Print Then Cut sensor in the Cricut machine, causing it to not be able to read the cut sensor markings.
- Cricut Venture, Cricut Joy Xtra, Cricut Explore 3 and newer, and all Cricut Maker machines: Print on white, lightly colored, and simple patterned materials. Cricut Printable Vinyl and Waterproof Sticker Sets in gold, silver, and holographic materials are compatible, but non-Cricut materials with darker colors, high-gloss finishes, or holographic patterns may cause issues with the sensor scan accuracy.
Printer Settings for Print Then Cut Projects
When your computer’s print dialog opens, make sure of the following:
- Paper size matches the page size shown in Design Space. For example, if Design Space shows 8.5 in x 11 in (Letter), choose an 8.5 x 11 in paper size in the print dialog. See Why the paper size must match below.
- Orientation is set to Portrait.
- Scaling is 100%. Don’t enlarge, and don’t use “Fit to page” or “Shrink to fit.”
- Layout is 1 page per sheet.
- Print quality is set to the highest setting available.
- Your printer isn’t low on ink.
- Narrow margins, edge-to-edge (borderless) printing, and center alignment are turned off.
- Ideal margins are 0.5 in (1.25 cm) to 1.5 in (3.8 cm) down and to the right from the top-left corner.
Create a Printable Design
Make a design printable
You can convert any single cut image into a printable image by changing the Operation type to Print Then Cut in the Edit bar. On mobile, select Edit > Operation > Print Then Cut.
Windows/Mac
iOS
Android
To convert a multi-layer design into a single printable layer, use the Flatten tool.
-
Select all objects you want to Print Then Cut, then select the Flatten tool.
DesktopiOS/Android
-
The Layers panel now shows your selection compressed into a single printable layer. The machines will cut around the outer shape of the design.
Windows/Mac
Tip: If each letter or image is being cut out separately, use Flatten instead of Attach.
Use print-ready designs from Design Space
Many designs in the Cricut library were made for Print Then Cut.
- Create a new project in Design Space.
- Select Images.
- Select Filters > Operation Type > Print Then Cut. The page reloads to show designs made for Print Then Cut.
- Search or browse for a design you like, select it, and insert it onto the Canvas. The tool bar shows that it’s already set up for Print Then Cut.
-
When you’re ready, select Make -and follow the prompts in Print Your Project below.
Windows/Mac
iOS
Android
Upload Images
You can upload images you find online or buy from other designers and save them as Print Then Cut images. For instructions on uploading images into Design Space, visit this help article: How to upload images into Design Space.
Important: Cricut encourages you to respect the intellectual property rights of others and to upload only images you own or are authorized to use.
Print Your Project
Windows and Mac
Design Space now always prints through your computer’s system print dialog. You no longer choose a printer inside Design Space; instead, you pick your printer and confirm your paper settings in the print dialog that opens after you select Print.
- From the Canvas, select Make.
- On the Project Preview screen, select Continue.
- On the mat preview, select Send to Printer.
- If the Sensor Marks Added screen appears, review it and select Next.
- The Print Setup screen opens (Figure 1). Check the Page Size and turn Add Bleed on or off. Bleed is on by default and is recommended.
- Select Print. Your computer’s print dialog opens.
- In the print dialog, choose your printer, then confirm the Paper Size matches the Page Size from the Print Setup screen, Orientation is Portrait, and Scaling is 100% (Figure 3). On Windows, select More settings to see the paper size.
- Select Print in the print dialog.
- Back in Design Space, compare your print to the Verify Print Quality screen. Your print should have four sensor marks, a directional arrow in the top-left corner pointing up, and at least 1/2 inch (1.25 cm) between the sensor marks and the edges of the material. Select Done.
- Load your printed material onto the mat and follow the on-screen prompts to cut.
Tip: Your print dialog may open behind the Design Space window. If nothing seems to happen after you select Print, check your taskbar (Windows) or Dock (Mac).
Figure 1. The Print Setup screen in Design Space.
Why the paper size must match
The page size you see on the Print Setup screen is the size Design Space used to lay out your design and its sensor marks. Your printer doesn’t know about that choice, so the paper size in the system print dialog must be set to the same dimensions.
IMPORTANT: Make sure the paper size in your computer’s print dialog matches the page size selected in Design Space.
For example, if Design Space shows 8.5 in x 11 in (Letter), the print dialog must be set to an 8.5 x 11 in paper size. If Design Space shows A4, choose A4 (210 x 297 mm).
If the sizes don’t match, your printer may scale the image to fit the paper. The design and sensor marks then print at the wrong size, and the machine can’t cut along the edge of your image, so the cut will be unsuccessful.
Figure 2. The Page Size on the Print Setup screen (highlighted) is the size to match in your print dialog.
The paper size may have a slightly different name in your print dialog (for example, “Letter,” “US Letter,” or “US Letter Small”). What matters is that the dimensions match. On a Mac, the dialog should look like Figure 3. On Windows, select More settings in the print dialog to check the paper size and scaling.
Figure 3. The Mac print dialog with Paper Size (highlighted) set to 8.50 by 11.00 inches, Portrait orientation, and 100% scaling.
Want to adjust the size before printing? Save as PDF
If you’d like to make further sizing changes to the image before you print, we recommend saving it as a PDF from the print dialog instead of printing right away.
- Mac: At the bottom-left of the print dialog, select the arrow next to PDF, then choose Save as PDF… or Open in Preview (Figure 4).
-
Windows: Choose Microsoft Print to PDF from the Printer list (Figure 5), then select Print.
Figure 4. Mac: the PDF menu at the bottom of the print dialog. Figure 5. Windows: Microsoft Print to PDF selected as the printer. Important: When you print the PDF later, the same rules apply: the paper size must match the page size selected in Design Space, orientation must be Portrait, and scaling must be 100%.
iOS
-
From the Canvas, select Make.
-
On the preview screen, tap the mat icon in the top left, next to the Back arrow. The preview shows your material size.
-
In the Mats panel, adjust Project Copies and turn Bleed (for Print Then Cut) on or off. Bleed is on by default and is recommended. Select Close.
-
On the preview screen, select Next.
-
Select Send to Printer. If you've already printed, select I've Already Printed instead.
-
The Sensor Marks screen shows "Cut Sensor Marks Added". Review it and select Next. If you check Don't show this again, the screen won't appear next time.
-
When prompted to use white or light-colored material, select Got It. This prompt appears every time.
-
Your device's print options open. Tap Printer and choose your printer. Make sure Paper Size matches the material size shown on the preview screen. If your printer offers Double-sided, turn it off. iOS doesn't show orientation or scaling options here; Design Space sets those for you.
-
Tap the printer icon in the top-right corner to print.
-
Back in Design Space, compare your print to the Verify Print screen. Your print should have four sensor marks, a directional arrow in the top-left corner pointing up, and at least 1/2 inch (1.25 cm) between the sensor marks and the edges of the material. Select Done. This screen only appears after a print is sent. If you close the print options without printing, you go back to the Print step.
-
If your machine isn't connected yet, Design Space asks you to connect it. Then select your material, load your printed material on the mat, and follow the on-screen prompts to cut.
Note: The available print options depend on the printer. For example, a printer that's low on ink shows a note and an alert.
Android
- From the Canvas, select Make.
-
On the Prepare screen, adjust project copies and turn Bleed on or off as desired (Bleed is on by default and is recommended). Then, select Next.
-
On the Preview screen, select Next.
-
Select Send to Printer.
-
If the Cut Sensor Marks Added screen appears, review it and select Next.
-
If you receive a Print Material prompt to use white or light-colored material, select OK.
-
Your device's print dialog opens. In the print dialog, choose your printer, then confirm the Paper Size matches the Page Size from the Print Setup screen, Orientation is Portrait, and Scaling is 100%.
-
Select the print option in the print dialog.
-
Back in Design Space, compare your print to the Verify Print screen. Your print should have four sensor marks, a directional arrow in the top-left corner pointing up, and at least 1/2 inch (1.25 cm) between the sensor marks and the edges of the material. Select Done.
-
Load your printed material onto the mat, select a matching material in Design Space, and follow the on-screen prompts to cut.
Turn Bleed On or Off
Each image in a Print Then Cut project gets a bleed by default. The bleed is a small border around each image that allows for more precise cutting. Printing with a bleed is recommended for the best results, but you can turn it on or off.
Windows and Mac
- From the Canvas, select Make.
- On the Project Preview screen, select Continue.
- Select Send to Printer. (If the Sensor Marks Added screen appears, select Next.)
-
On the Print Setup screen, use the Add Bleed toggle to turn bleed on or off.
iOS
- From the Canvas, select Make.
- Tap the mat options button in the top-left.
-
Turn the Bleed option on or off.
Android
- From the Canvas, select Make.
-
On the Prepare screen turn the Bleed option on or off.
Note: The bleed may make the printed image look fuzzy or distorted, but that border is trimmed off during cutting, leaving a precisely cut image.
Print Then Cut in One Session
To avoid errors, complete the whole process, from printing the project to the final cut, in one flow from the same device. You can save your project in Design Space and come back to it later.
Troubleshooting Print Then Cut
The print dialog doesn’t appear
The print dialog may have opened behind the Design Space window. Check your taskbar (Windows) or Dock (Mac) and bring the print dialog to the front.
My printer isn’t listed
Printers are now chosen in your computer’s print dialog, not in Design Space. If your printer isn’t listed there, add it or check its connection in your computer’s settings:
- Windows: Start > Settings > Bluetooth & devices > Printers & scanners. You can also search for “printers,” or select Add a printer in the print dialog. Remove any printers you don’t recognize.
- Mac: Apple menu > System Settings > Printers & Scanners.
Then return to Design Space and try printing your project again.
The image printed at the wrong size, or the cut doesn’t line up
This usually means the paper size or scaling in the print dialog didn’t match Design Space. Reprint and check that:
- The paper size in the print dialog matches the Page Size on the Print Setup screen (for example, 8.5 x 11 in for Letter).
- Orientation is Portrait.
- Scaling is 100%, with no “Fit to page” or “Shrink to fit.”
The machine can’t read the sensor marks
If you see an error saying the machine can’t read the cut sensor marks, follow the steps in this help article. Also make sure you printed and cut in one session from the same device, and that the paper size in the print dialog matched Design Space.
Image too large
If your printable design is too large for the page size set for Print Then Cut, resize your design to fit or choose a larger page size. Select the warning message in the Layers panel and choose the option to auto-resize your design to fit.
To change the page size instead:
Windows/Mac: Open the Design Space menu > Settings > Load Type >Print Then Cut Page Size, and choose a default page size for Print Then Cut projects. Remember to choose the same paper size in your print dialog.
iOS/Android: Open the Design Space menu (three lines in the upper left) > Settings > Print Then Cut Settings > Default Size, and choose a default page size for Print Then Cut projects. Remember to choose the same paper size in your print dialog.
Machine calibration
Machines come pre-calibrated, but if you notice cut inaccuracies on Print Then Cut projects, calibration may help. To recalibrate your machine for Print Then Cut, ensure your machine is powered on and connected to Design Space. Then follow these steps:
- Windows or Mac: Select Design Space menu (upper right) > Settings > Machines tab > Machine Calibration > Print Then Cut.
- iOS or Android: Select Design Space menu (upper left) > Settings > Print Then Cut Settings > Calibration.
Then follow the on-screen prompts.
Note: Significant updates to Print Then Cut in June 2022 required recalibration. If you haven’t recalibrated for Print Then Cut since June 2022, you’ll be asked to calibrate before you can finish a Print Then Cut project.
The machine cuts individual elements instead of the outer edge
This can happen when Attach is used instead of Flatten on a multi-layer design. Select all layers of your design and use Flatten. This compresses the layers into a single printable layer, and the machine cuts the outer edge only.