Learn how to load Photo Paper and Sticker Sheets into the Cricut StickerPix Print + Cut Material Tray.
Remove the Material Tray from the storage slot.
Lift the Material Tray cover.
Load material into the tray with the printing side facing up. Adjust the material guide for the material you are using.
Important: Do not touch the printing side of the material. Oils and fingerprints can affect print quality.
Photo Paper: Set the material guide to the 4x6" position.
Important: Do not remove the Photo Paper tear-off strips before printing. The strips are necessary to help feed the material through the machine.
Sticker Sheets: Set the material guide to the 4x7" position.
Close the Material Tray cover.
Insert the Material Tray into the Material Tray Slot. The Material Tray Slot is directly below the Material Tray storage area. Push the tray in until it clicks into place.
Material Tray capacity
The Material Tray holds one packet of material, or 18 sheets.
Note: When the Material Tray is not in use, place it in the Material Tray storage slot and close the machine door.