How to adjust Cricut Mug Press temperature

For some unwanted transfer results, using a cooler or warmer setting on Cricut Mug Press may help. 

• Yellowing or over-processing of design — use a cooler setting
  
  
   
• Bottom corners of design not transferring, or lack of clean edges near handle — use a warmer setting
  
  

How to change the temperature setting

Enter Temperature Setting mode from any machine state, whether powered on or off. 

1. Press and hold power button for 10+ seconds. You will hear two chimes and all LEDs will flash once when Temperature Setting mode begins. Power button will flash orange continuously while in Temperature Setting mode. 

Note: Wait for two chimes before releasing the power button. Otherwise, Cricut Mug Press will not be in Temperature Setting mode. 

2. The row of LEDs will display the current setting. Push power button to cycle through the 3 setting options: 
   • Cooler – first LED solid on
     
   • Normal – third LED solid on
     
   • Warmer – fifth LED solid on
     
3. When desired setting shows on LED display, hold power button for 3 seconds to select that setting. A chime will sound, LED display and power button will flash, and the press will power off to exit Temperature Setting mode. 
4. The new setting will be in effect when press is powered back on. 

Tip: To exit Temperature Setting mode without selecting a new setting, simply unplug power cable. When plugged back in and powered on, press will use original temperature setting. 

Note: If changing the setting does not resolve the issue, you can change the setting back to Normal using the steps above. Contact Member Care for further assistance.