Edited: August 29, 2023
Follow the instructions below to cut and apply Cricut Joy Smart Label Writable Vinyl.
What you need
- Cricut Joy or Cricut Joy Xtra smart cutting machine
- Design Space app on computer or mobile device
- Cricut Joy Blade and Housing
- Smart Label Writable Vinyl compatible with your machine
- Cricut Joy - 5.5 in (13.9 cm) wide
- White, Black, Transparent, Gold, Silver, Silver Holographic
- Cricut Joy Xtra - 9.5 in (24.1 cm) wide
- White - Permanent
- White - Removable
- Cricut Joy - 5.5 in (13.9 cm) wide
- Cricut Joy Pens or Markers*
*Cricut Joy Opaque Gel Pens may be used, but other Cricut Joy Gel Pens are not compatible.
Design and cut
- Customize your label design in Design Space. When using Design Space. Use Attach to fasten Draw layers to Cut layers.
- Select your material load style (Without Mat) and your specific material type.
Note: For the rollers to grip and load your material, Cricut Joy machines allows 1 in (2.5 cm) of space at the top of your design and 0.5 in (1.27 cm) at the bottom. To ensure you have enough Smart Materials for your design, wait until after the cut is complete to trim.
- Using both hands, insert material under guides. Continue feeding into machine until rollers grip material.
- For best results, make sure your material has a straight edge.
- Once machine senses materials under the rollers, it measures your material to ensure there's enough for your project.
- Leave 10 in (25.4 cm) of space behind your machine so materials have room to feed through.
- Smart Materials may bow in the middle when loading. If your material isn't lying flat by the end of the measuring process, select Unload in the software, then reload.
- The software will prompt you to load your pen, and again when it's time to insert your blade.
- Select Go and watch the magic happen!
- When cut is complete, select Unload.
- Allow ink to dry before handling.
Tip: Smart Materials must be at least 4 in (10.16 cm) long to use without a cutting mat with Cricut Joy, and at least 6 in (15.24 cm) long to use without a cutting mat with Cricut Joy Xtra. You can still use shorter by placing them on a StandardGrip Mat.
Apply labels
- Make sure your project surface is clean and dry.
- Peel labels from liner by hand and stick to project surface. Use care to avoid tearing.
Important: Do not use Transfer Tape with Smart Label Writable Vinyl as it may damage the label surface. Not for use with printers.
Note: Smart Label Writable Vinyl may leave residue upon removal from your surface.
FAQ
Can I use transfer tape with Writable Vinyl?
No, do not use Transfer Tape with this material. The adhesive on the tape will remove the writable coating on the vinyl.
Will this product work with any Cricut Joy Pens & Markers?
This product works with most Cricut Joy Pens & Markers, including gel*, glitter, opaque, and permanent inks. It is not recommended for use with Infusible Ink Pens & Markers, or the Cricut Fabric Pen.
*Cricut Joy Opaque Gel Pens may be used, but other Cricut Joy Gel Pens are not compatible.
Is this a permanent or removable adhesive?
All Smart Label Writable Vinyl is available with a durable permanent adhesive, but only three colors — white, transparent, and black — are also available with a removable adhesive.
Is this product available in other sizes?
Yes! It is available in the following sizes and colors:
For Cricut Explore 3 and Cricut Maker 3:
- White - 13 in (33 cm) wide
- Black - 13 in (33 cm) wide
- Transparent - 13 in (33 cm) wide
For Cricut Joy:
- White – 5.5 in (14 cm) wide
- Black – 5.5 in (14 cm) wide
- Transparent – 5.5 in (14 cm) wide
- Silver – 5.5 in (14 cm) wide
- Gold – 5.5 in (14 cm) wide
- Silver Holographic – 5.5 in (14 cm) wide
For Cricut Joy Xtra:
- White - 9.5 in (24.1 cm) wide
Note: While Smart Materials must be compatible with your machine size to use without a cutting mat, you can still use smaller pieces by placing them on a cutting mat.