How to adjust Cricut EasyPress 3 temperature

Cricut EasyPress 3 time & temperature settings can be adjusted manually using the buttons on the press itself or wirelessly through the Cricut Heat App. 

Adjusting settings manually

• • To set temperature: Press the temperature button (3 heat wave lines), then adjust with the plus (+) and minus (-) buttons. To switch from Fahrenheit to Celsius, press and hold the temperature button until you see the change from °F to °C occur on the screen. 
  • To set time: Press the time button (with the image of a clock), then adjust the value with the plus (+) and minus (-) buttons.
  • What the lights mean:
    • Orange = it’s heating up
    • Green = temperature has been reached
    • Red = there is an error

Note: Recommended time and temperature settings for Cricut EasyPress 3 are found in the Cricut Heat app. 

Adjusting settings using Cricut Heat app

1. Plug Cricut EasyPress 3 into a compatible wall outlet and press the power button to turn on. 
2. Launch the Cricut Heat app. 
3. Under My Heat Presses, select Cricut EasyPress 3, and select Start New Project.
4. Select your transfer material, the base material to which you will apply it, and what you're using as a pressing surface, then select Next. 
5. Once all selections have been made, select Send Settings to EasyPress.
6. The app will show progress as your press is heating up to the target temperature. 

Creating a custom setting

1. Launch the Cricut Heat app. 
2. Under My Heat Presses, select Cricut EasyPress 3. 
3. Select Set custom time & temp under Start New Project. 
4. Tap on the Temperature and Press fields to enter the desired temperature and time. . It will be in 5° increments.
5. Choose Preheat and Flip & Press settings as desired.
6. Once all selections have been made, select Send Settings to EasyPress.