Top
Alert

Design Space will be performing scheduled maintenance beginning on April 20th, 10:00 pm MST until April 21st, 12:00 am MST. Please plan accordingly. You can still use Design Space for Desktop and iOS if you are in offline mode.

Tips

Cricut EasyPress: Using iron-on (HTV) with non-fabric materials

Iron-on (HTV) isn't limited to just fabrics. Customize home decor, including wood and paper.

How do I apply iron-on (HTV) to non-fabric materials?

  1. Ensure that your base material (wood, paper, etc.) is very flat, then place your image onto your base material.
    • It must be flat so the heat plate can make full contact with your iron-on design.
  2. Plug in and power on your Cricut EasyPress.
  3. Set the temperature and timer to the setting that is recommended for your base material. Use this online Heat Guide or Cricut Heat app (for Cricut EasyPress 3) to find the right settings for your project.
  4. Place Cricut EasyPress over your image and press the Go button to start the timer.  Next, remove your hand from Cricut EasyPress, so it stays in place as it heats your iron-on design.
    • If your iron-on design is moved as it heats, the softened adhesive may cause your iron-on design to slip, leaving an outline of adhesive residue.
  5. Remove Cricut EasyPress when the timer beeps. While your iron-on design is still warm, rub it a bit with a balled-up cloth. This technique is called burnishing, and it helps your iron-on design adhere to the base material.

Tip: If you need to use a press cloth or Teflon sheet to protect your base material, you may need to increase the time and/or temperature.

Related articles